We are also involved in the manufacturing of Epidiascope 1000 watts, which gives large and brilliant images for best usage. Some of them are:

• Images of 8.2 cm x 8.2 cm Lantern slides


• 5x5 cm Kodachrome slides


• 35 mm film strips


• Microscope slides


• Opaque objects such as manuscript photos from News Paper, Charts, Magazines etc.

Our range of Epidiascope 1000 Watts is manufactured to solve various purposes at laboratories. This convertible projector helps in delivering brilliant image. Some of the features are:

• It is an efficient air cooled Epidiascope.


• It is equipped with high grade Anastigmatic lenses.


• It has surface coated reflecting mirrors.


• It has perfectly equipped noiseless cooling fan with plenty of general ventilation.

Our manufactured Epidiascope 1000 Watts is well suited to take projection of opaque objects such as photographs/manuscripts. The projection can be obtained by placing the specimens on large size table 12" x 9" which drops down three inches by a cam operated handle. Our Epidiascope can be used as a Slide Projector by the turn of a lever and by attachment of slide carrier.

Apart from this, our Epidiascope 1000 Watts, can also be used as Film Strip Projector & Micro slide Projector with the aid of different accessories supplied along with. The whole set is complete with 1000 watts , 220/250 volt projection tube to give the full satisfaction at work.

Our range of senior rotary microtome model (LATEST SPENCER 820 TYPE) are best suitable for the biological laboratories. Some of the salient features are as follows:

• It has independent feed mechanism with automatic safety device.


• It has universal knife holder with lateral movements permitting use of the entire Knife edge.


• It has universal vice type object holder for accurate centering of the specimen.


• The feed indicator, located in front of microtome is operated by the latest "CAM DRIVE SYSTEM" for accurate feed setting from 1-50 microns in steps of 1micron.


• The interior mechanism rests on a heavy cast iron base and is covered with a full swing protective cover for easier cleaning & lubrication.


• It has feature for very precise sectioning of tissue up to 1 micron thickness.


• It is provided with adjustable steel/ aluminium wire mesh tray for better air circulation.


• It has double walled construction with inside aluminium/ stainless steel chamber 304 grade outer M.S. duly powder latch catch.


• The temperature is recorded by means of L shaped Prismatic Thermometer fitted at the front of the cabinet.


• It has temperature controlled system which is done by hydraulic type Bi-Metallic capillary thermostat which ranges from room temperature to 250°C ± 1°C.

Our range of Senior Rotary Microtome Model (LATEST SPENCER 820 TYPE) is supplied with the varied accessories, such as:

• Razor 120 mm with back & handle in box :1 No.


• Oil Can & Dust Cover :- 1 No. each


• Honing stone in Box :- 1No.


• Object holder (set of 3) :- 1Set

We are manufacturing light weight muffle furnace with ceramic fiber wool insulation (instead of brick insulation). Its outer casing is made of double walled thick PCRC sheet, reattached with thick perforated sheet on the bottom portion, painted with attractive stove enamel/ powder coated. Further, it has the following advantageous features to its credit:

• Digital temp. controller - cum indicator instated of E.R & pyrometer


• PID temp. controller-cum-indicator


• Heating elements are made of KANTHAL "A-I" wire and backed by high temperature ceramic wool insulation, which avoid loss of energy.


• Temperature control unit consists of Energy Regulator, fitted in front of furnace with two pilot lamps.


• The apparatus is complete with one pyrometer, thermocouple, silver thermal fuse, main lead with power plug.


• To work on 220/ 230 volts AC, the energy regulator dial is arbitrarily marked 0-100 position. This marking does not indicate temperature. It indicates control level i.e. at position '100' maximum electricity is allowed to flow to furnace. At position 'a' minimum electricity is flow to furnace.


• Maximum temp. is 950°C and working temp. 900°C.


• Rectangular shape wounded muffle baked at high temperature is fitted inside the chamber.

Muffle Size	Rating
100x100x225mm. 12,500	1.5 kw
125x125x250mm 14,500	2.0 kw
150x150x300 mm 18,500	3.5 kw
175x175x475 mm	3.5 kw
200x200x300mm	4.5 kw